手机版 |
产品分类 |
动物实验仪器
小鼠无约束自由活动笼
大鼠无约束自由活动笼
小鼠清醒活动笼
大鼠清醒活动笼
低氧浓度大小鼠饲养舱
低氧环境大小鼠饲养舱
低压环境大小鼠饲养舱
高原氧气环境大小鼠饲养舱
高原氧环境大小鼠饲养舱
高原环境大小鼠饲养舱
其他
Model 3600 16-Channel微电极放大器
Model 3500 16-Channel Extracellula
Model 1800 2-channel型微电极放大器
AM Systems微电极放大器
台式蒸汽消毒器,蒸汽灭菌器
台式蒸汽灭菌器,蒸汽消毒器
饲养笼架
暗箱式微型紫外系统GL-200型
96孔微孔板混匀仪QB-8002
微孔板恒温振荡器BE-9010
临床检验仪器设备
心率变异性HRV分析软件
游离血红蛋白测试仪
压力测试仪
人体压痛测试仪
人体多导生理记录仪
多道脑电图记录仪
人体脑成像系统
无线生理信号记录分析系统
眼动仪
半自动生化分析仪
芯片系统
人体血液循环模拟系统
微流体细胞粘附分析芯片
VenaFlux Platforms
Cellix细胞分子活性筛选分析系統VenaFlux™
Cellix Kima Pump经济型微流体泵
细胞分子活性筛选分析系統
DucoCell微流体细胞工作站软件
细胞微流体工作站(VenaFlux Platforms)
EXIGO微流体控制泵
VENA8 ENDOTHELIAL+微流体芯片
生物工程设备
动物生化分析仪
游离血红蛋白检测仪
细胞培养气体控制器
二氧化碳氧气浓度控制器
细胞培养系统
显微镜环境控制系统
细胞动态观察舱
显微镜细胞培养舱
显微镜物镜加热器
细胞生物学仪器
COPAS斑马鱼自动分选系统
COPAS秀丽线虫自动分选系统
COPAS微模式生物自动分选系统
动物血液分析仪,五分类血球仪
三分类血液分析仪
试验机
Jamar Plus+握力测力计
手持握力计,手握力计Jamar Plus
手持式握力测力计Jamar Plus
制样/消解设备
组织切片机
自动组织振动切片机
组织振动切片机
光学仪器及设备
动物手术显微镜
小动物手术显微镜
分子生物学仪器
德国耶格( JAEGER)运动心肺检测系统
显微镜温度控制器
泵
细胞显微注射泵
药物检测专用仪器
渗透池,透皮仪,Franz扩散池
联系方式 |
产品系列
显微镜环境控制箱,用于控制显微镜观察台的温度、湿度、气体浓度保持恒定的状态,以进行长时间动态细胞观察。
我们可以为各种品牌的显微镜定制专业的显微镜环境控制系统。详情请来电咨询。
Complete systems include
? Microscope enclosure
? Stage top climate chamber
? Temperature controller with air heater
? Gas controller (CO2, O2, or dual CO2/O2)
? Humidity module ? Touch screen interface
? Smart box (optional)
? Obscuring panels (optional)
? Filter box (optional)
Bold Line Microscope Enclosure
A controlled environment all around the microscope.
The CO2 Microscope Cage Incubator is designed to maintain the required environmental conditions for cell culture around your microscopy workstation, enabling prolonged observations on biological specimens and allowing space for other equipment.
Cells cultured within the microscope cage incubator have been shown to proliferate as well as in a regular bench-top incubator.
Models for any inverted and upright microscope are available. A wide choice of chambers and interchangeable plate adapters allow the use of any cell culture support (petri, glass slides, multiwell plates, and others). Compatible with manual and digital CO2 / O2 gas controllers.
Easy 'turn-to-open' assembly
'Turn-to-open' hinges permit direct removal of both the front and upper panel. Once these panels have been removed, the rest of the cage incubator can be easily moved backwards. When needed, the cage incubator can be reassembled in five minutes.
Full accessibility
Several doors on the front and side panels allow full and easy access to the microscope. In particular, two openings on the bottom of the front panel provide unrestricted access to the focus knob.
Additional doors can be added upon request.
Obscuring Panels
Obscuring panels can be assembled with the cage by means of turn to open hinges to create a darkeded environment for fluorescence experiments.
Temperature Controller - H201 T UNIT BL
The H201 T UNIT BL is the temperature controller used with the cage incubator, it includes the air heater, and requires the Oko-Touch for operation.
The controller keeps the specimen at the desired temperature by maintaining the temperature of the air blown into the enclosure. A filter box can be attached to the air heater to guarantee that the recycled air is dust and bacteria free. Temperature precision is 0.1°C from 3°C above ambient to 40°C.
The air heater has a double inlet and outlet to recycle the heated air. Flow rate and temperature sensors are continuously monitored and allow fast start- up and stable gradient free operation during the experiment. Air flow rate and temperature are set using the OKOTouch.
Specimen / Cage
Temperature feedback operation There are two ways to operate the system depending on which temperature sensor is used to provide feedback to the H201 - T UNIT BL.
In the specimen feedback mode, feedback is provided by a sensor placed inside the climate chamber near the specimen. Simple manipulation is required to attach the thermocouple into the reference well with adhesive tape.
In the enclosure feedback mode the sensor is measuring the temperature of the air inside the enclosure.
请关注玉研仪器的更多相关产品。
如对产品细节和价格感兴趣,敬请来电咨询!